New Arrival China Material Torsion Testing Equipment - CYLSN-1000E Microcomputer Controlled High Strength Bolt Testing Machine – Chengyu


Specification

Related Video

Feedback (2)

Dedicated to strict top quality command and considerate purchaser support, our experienced staff customers are always available to discuss your necessities and be certain full client gratification for Computer Control Tensile Tester, Cement Compression Testing Machine, Horizontal Tension Testing Machine, We welcome new and outdated shoppers from all walks of lifetime to call us for long term company associations and mutual accomplishment!
New Arrival China Material Torsion Testing Equipment - CYLSN-1000E Microcomputer Controlled High Strength Bolt Testing Machine – Chengyu Detail:

CYLSN-1000E Introduction

1.1 ApplicationThe detector is based on GB/T 2611-2007 “General Technical Requirements for Testing Machines”, JB/T 9370-2015 “Technical Conditions for Torsional Testing Machines”, JJG 139-2014 “Testing Machine Verification Regulations” and other commonly used national and industry testing machine standards . At the same time, refer to GB/T1231-2006 “Technical Conditions for Large Hexagon Bolts and Large Hexagon Nuts for Steel Structures”, GB/T16823.1-2010 “Fastener Torque-Clamping Force Test”, GB50205-2001 “Construction Quality of Steel Structure Engineering” “Acceptance Specification”, GB/T 32076.2-2015 “Preload High Strength Bolted Structural Connection Pair”, EN 14399.2-2005 “Preload High Strength Structural Bolt Assemblies. Part 2: Preload Suitability Test”, ASTM A325M-2009 “Standard Specification for Heat Treated Steel Structural Bolts with Heat Treated Minimum Tensile Strength of 830Mpa”, ASTM F3215/F3125M-15a “Heat Treated Minimum Tensile Strength of 120 ksi (830 MPa) and 150 ksi (1040 MPa) Standard Specification for Steel and Alloy Steel High Strength Structural Bolts with Inch and Metric Dimensions “AS/NZS1252:1996 “High Strength Bolts for Construction (Bolts with Nuts & Washers)” NB/T31082-2016 “Wind Turbine Towers It can be designed and manufactured according to relevant requirements such as High-strength Bolt Connection Pairs for Racks. It can detect, display and print the axial force, torque and torque coefficient of hexagonal head and double-head high-strength bolt connection pairs. When the axial force reaches the value specified in the standard, the detector will beep and record the peak value of the detection data. After the equipment stays for 1 second, it will automatically reverse and loosen the sample. At the same time, the detector will automatically calculate the torque according to the detected axial force and torque. The coefficient is automatically displayed; when a group of tests is completed, the detector automatically calculates the average axial force, average torque, average torque coefficient, standard deviation and coefficient of variation of N specimens;

 

1.2 Technical parameters and control methods:

1.2.1 Voltage: control system 220V AC; motor AC 380V

1.2.2 Total motor power: 5.0KW

1.2.3 Output speed: 0.1-4r/min

1.2.4 Axial force detection range: 100-1000kN

1.2.5 Torque detection range: 100-5000Nm

1.2.6 Large hexagon bolt specifications: M10M12M16M20M24M27M30M36M39

1.2.7 Bolt length: 30mm—350mm (≥2.5d)

1.2.8 Test accuracy: axial force ±1.0% torque ±1.0%

1.2.9 Torsion angle measurement range 0-1000° (unlimited)

1.2.10 Relative error of indication value of torsion angle ±1%

1.2.11 Relative error of torsion speed Within ±1.0% of the set value

1.2.12 Weight: about 2000kg

1.2.13 Customized measurement and control system*1(meet EN14399-2:2005(E) standard)

1.3 Control method:

1.3.1 The equipment can be controlled by any method such as setting the axial force, setting the torque, and setting the angle of rotation.

1.3.2 It has the function of setting initial torque→first target angle→second target angle, and then testing the torque value and axial force value under each target.

Configuration list

No.

Items

Unit

Qty.

1

Test host (including high-precision 1000kN axial force sensor and 5000NM torque sensor)

set

1

2

3.0KW imported servo motor kimono drive system

set

1

3

Microcomputer-controlled high-strength bolt test special controller

set

1

4

Lenovo computer mainframe and LCD monitor

set

1

5

Nut sleeve

set

1(total 10 pieces)

6

Bolt outer plate or outer plate M10M12M16M20M22M24M27M30M36 M39

set

1(total 10 pieces)

7

Bolt inner baffle M10M12M16M20M22M24M27M30M36 M39

set

1(total 10 pieces)

8

Anti-rotation board M10M12M16M20M22M24M27M30M36 M39

set

1(total 10 pieces)

9

Front and rear automatic adjustment device of mobile base (including motor, reducer and high-precision ball screw)

set

1

10

Full protection safety push-pull metal shield (this is optional)

set

1


Related Product Guide:

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate inside our success for New Arrival China Material Torsion Testing Equipment - CYLSN-1000E Microcomputer Controlled High Strength Bolt Testing Machine – Chengyu , The product will supply to all over the world, such as: Paris, Irish, Estonia, Our advanced equipment, excellent quality management, research and development ability make our price down. The price we offering may not be the lowest, but we guarantee it is absolutely competitive! Welcome to contact us immediately for future business relationship and mutual success!
Problems can be quickly and effectively resolved, it is worth to be trust and working together.
5 Stars By Nick from Mexico - 2018.08.12 12:27
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
5 Stars By Renata from Ghana - 2018.08.12 12:27
Write your message here and send it to us