Application
It is applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile, and components testing. It is widely used in the corresponding industries, research and development, test institutes and training centers etc.
Database management of test data, you can use Excel and other software to communicate with the test database; the machine has the characteristics of beautiful appearance, convenient operation, stable and reliable performance, no pollution, low noise and high efficiency.
Specification
model |
WDS-200D |
WDS-300D |
Maximum test force |
200KN 20 tons |
300KN 30 tons |
Test machine level |
0.5 level |
0.5 level |
Test force measurement range |
2%~100%FS |
2%~100%FS |
Relative error of test force indication |
Within ±1% |
Within ±1% |
Relative error of beam displacement indication |
Within ±1 |
Within ±1 |
Displacement resolution |
0.0001mm |
0.0001mm |
Beam speed adjustment range |
0.05~500 mm/min (arbitrarily adjusted) |
0.05~500 mm/min (arbitrarily adjusted) |
Relative error of beam speed |
Within ±1% of the set value |
Within ±1% of the set value |
Effective tensile space |
600mm standard model (can be customized) |
600mm standard model (can be customized) |
Effective test width |
600mm standard model (can be customized) |
600mm standard model (can be customized) |
Dimensions |
1120×900×2500mm |
1120×900×2500mm |
Servo motor control |
3KW |
3.2KW |
power supply |
220V±10%; 50HZ; 4KW |
220V±10%; 50HZ; 4KW |
Machine weight |
1350Kg |
1500Kg |
Main configuration: 1. Industrial computer 2. A4 printer 3. A set of wedge-shaped tension clamps (including jaws) 5. A set of compression clamps |
Key Features
1. Adopt floor structure,High Stiffness, lower for tensile, upper for compression,upper for tensile, lower for compression, double space. The beam is step less lifting.
2. Adopting ball screw drive, realize no clearance transmission,make sure the precision control of the test force and deformation speed.
3. The shiel plate with limit mechanism used to control the beam moving range, in order to avoid sensor damaged due to the moving distance is too large.
4. The table, moving beams is made of high quality precision machining steel plate , not only reduce the vibration generated by specimen fracture, but also improve the stiffness.
5. Three columns of mandatory orientation, make the main unit rigidity much improved, to further ensure the repeatability of measurement.
6. Adopt bolt type grip installation, make the grip replace easier.
7. Adopt AC servo driver and AC servo motor, with stable performance,more reliable. Have over-current, over-voltage, over speed, overload protection device.
Standard
ASTM, ISO, DIN, GB and other international standards.